How to Write a Lesson
Last updated on 2024-10-24 | Edit this page
Overview
Questions
- Why do we write explanatory content last?
- How can I avoid demotivating learners?
- How can I prioritise what to keep and what to cut when a lesson is too long?
Objectives
After completing this episode, participants should be able to…
- Estimate the time required to teach a lesson.
- Summarise the content of a lesson as a set of questions and key points.
- Connect the examples and exercises in a lesson with its learning objectives.
Writing Explanatory Text
Explanatory text (including examples) help connect your exercises together into a cohesive lesson. If your exercises are train stations and scenic views, the explanatory text is the train tracks that connect them. Often times the examples and exercises may seem like a good draft for you to teach. However, the explanatory text makes it possible for other instructors and self-directed learners to follow along by providing all the relevant information directly in the lesson. It can also help you remember your goals and stay on track teaching.
How much text to include is often a question of personal style while balancing the needs of potential users, both other instructors and learners. You want to find the balance between providing enough information for learners to meet the learning objectives without increasing cognitive load with extraneous information. In this section we will discuss factors to consider when you are writing explanatory text.
There are trade-offs to consider when preparing a site for use as an instructional guide vs use as a self-directed learning resource. Typically, self-directed learning resources are more verbose where instructional guides are aimed at an audience that can fill in the gaps on their own. However, very sparse text is less likely to be re-usable by other instructors as instructors may have different skill levels with the lesson content or differing mental models. In general, it is not a good idea to assume others, learners or instructors, will know what you were thinking when you wrote the content so, if in doubt, be explicit.
Exercise: Examples Before Exercises (20 minutes)
Looking back at one of the exercises you designed before: what examples could you include in your narrative to teach learners the skills they will need to apply to complete the formative assessments you have designed?
Outline one of these examples in your lesson design notes.
In the Software Carpentry Plotting and Programming with Python Lesson there is an exercise to load and inspect CSV file for Americas. In the lesson, before the exercise, the Instructor demonstrates an example of how to load the data table for another continent (Oceania) and explores the values with a few different functions. This shows learners how to call the function to load the CSV into a data frame, and demonstrates what success looks like for their exercise.
In the Python Interactive Data Visualization Lesson in the Incubator, there is an exercise to find the correct widget (a slider) for an action and modify the script to use it. In the lesson, before the exercise, the instructor introduces a cheatsheet and documentation for interactive widgets and then creates a dropdown widget for the application. The slider widget required in the exercise has not been demonstrated but the preceding example shows all of the necessary steps to add a widget, and provides the supporting information that learners can consult to discover how to implement the specific tool.
Less is More
Trying to fit too much content into a lesson is counter-productive. It is better to cover less and provide a smaller but stable foundation for learners to build upon.
You should also consider a realistic workshop length for teaching your lesson. It is difficult to keep learners attentive for many hours over many days. Most Carpentries workshops are two work days of lesson material as it is difficult for learners to attend 4 full days of a workshop. Although, there are some in the community who will run workshops that are three days to cover additional material.
As you consider the length of your lesson discuss with your collaborators and ask yourself:
- What is essential to include?
- What can be left out if needed?
- Are there checkpoints where the lesson could end if needed?
- Can important concepts be moved up earlier to ensure they are covered?
In the end, the only way to know for sure is to teach the lesson, measuring how long it takes to teach. Borrowing from television, The Carpentries community calls these early workshops, pilot workshops. As you run pilot workshops, you can note the length of time spent in each episode. You might find the template for notes on pilot workshops helpful as it includes a table for episode and exercise timings. Instructors commonly report running short on time in workshops. Thus, it is better to assume that you are under-estimating rather than over-estimating the length. It is better to have additional time for discussion, review, and wrap-up than to rush through material to fit it into the remaining time.
If, after piloting your new lesson, you find that you did not have time to cover all the content, approach cutting down the lesson by identifying which learning objectives to remove. Then take out the objective(s) and the corresponding assessment(s) and explanatory content. You may consider making a concept map to help identify which objectives depend on one another.
Alternatively, if you decide to keep certain objectives in the lesson, you can add suggestions on which objectives can be skipped to the Instructor Notes for the lesson. Instructor Notes are meant to convey teaching tips and advice to other instructors teaching your lesson and will be discussed in more detail later on in section “Preparing to Teach”.
As you add notes and think about what to cut, remember, reducing the number of lesson objectives can help with managing learner (and instructor) cognitive load.
Testimonial
“the five ways to handle an extraneous overload situation are to:
- eliminate extraneous material (coherence principle),
- insert signals emphasizing the essential material (signaling principle),
- eliminate redundant printed text (redundancy principle),
- place printed text next to corresponding parts of graphics (spatial contiguity principle), and
- eliminate the need to hold essential material in working memory for long periods of time (temporal contiguity principle).”
Lesson Time Management (10 minutes)
(5 minutes) In the shared notes document, note down your answers to these questions:
- From a design perspective, at what point is a lesson too long?
- What factors influence and constrain the length of a lesson?
- How might you prioritise what to keep if you have to cut lesson content down?
(5 minutes) In the remaining time, your Trainers will lead a discussion based on the responses.
Other Important Considerations for Lesson Content
Language
When writing your lesson text you also want to avoid unintentionally demotivating your learners. Make time to review your text for:
- dismissive language - e.g. ‘simply’, ‘just’
- use of stereotypes (check learner profiles for stereotypes too)
- expert awareness gaps, i.e. places where you may be assuming the learners know more than they actually do
- fluid representations, i.e. using different terms with the same meaning interchangeably
- unexplained or unnecessary jargon/terminology (as your learners may come from different backgrounds, may be novices, not native English speakers, and a term in one domain/topic may mean something else entirely in another)
- unexplained assumptions
- sudden jumps in difficulty/complexity
Accessibility
You should also review your text thinking about accessibility. This includes:
- Avoiding regional/cultural references and idioms that will not translate across borders/cultures
- Avoiding contractions i.e. don’t, can’t, won’t etc.
- Checking that all figures/images have well written alternative text, including writing alternative text for data visualizations. An alternative text contains an invisible description of an image which is read aloud to blind users by screen readers providing alternative text-based format for images. See the Workbench documentation for directions on how to add alternative text and captions to images in a lesson
- Checking the header hierarchy - no h1 headers in the lesson body, no skipped levels
- Using descriptive link text - no “click here” or “this page”, etc.
- Checking the text and foreground contrast for images
Optional Exercise: Alternative Text for Images (5 minutes)
Which of the following is a good alt-text option for the image below?
- Graph of data
- Graph with increasing lines
- Line graph of increasing carbon dioxide in ppm at the Mauna Loa Observatory from 1958 to present
- Line graph of increasing carbon dioxide in ppm at the Mauna Loa Observatory, Hawaii, United States, from 1959 to present including values from each year. Red line shows variation in each year and black line is average for each year. 1959 = 315.90 ppm, 1960 = 316.91, 1961 = 317.64 …
Data/Image provided by NOAA Global Monitoring Laboratory, Boulder, Colorado, USA
The third option, “Line graph of increasing carbon dioxide in ppm at the Mauna Loa Observatory from 1958 to present”, is the best option. It describes the type of plot, what is measured, and the trend.
The first two options are too vague. They mention a graph but don’t give enough info to know what the graph is actually showing.
The last option is overly descriptive and starts to list the data itself. It is better to include a shorter, but informative, description and a link to the data instead.
Glossary of Terms
When writing a lesson, you should also consider adding key terms or jargon to the lesson glossary for the lesson. In your shared notes document, you can start such a glossary as you develop your lesson, to keep a record of the terminology your audience needs to be familiar with.
Many of these terms may also be useful for other lessons and can be added to Glosario, a multilingual glossary for computing and data science terms.
Exercise: Explain Your Terminology (5 minutes)
In your shared notes document, add a list of terms or jargon from your lesson, along with their definitions.
You do not have to have a complete list now, but it is good to start working on it - you can always come back and update it later.
Questions and Keypoints
In addition to objectives, a completed episode also requires questions the episode answers and the keypoints a lesson covers.
The questions helps learners understand what to expect from a lesson as they might not yet understand the learning objectives.
The keypoints wrap up the lesson by providing answers to each of the questions. Keypoints also help self-directed learners review what they learned, remind instructors to recap what was covered in an episode, and help you ensure you answered all the questions you intended for an episode.
Exercise: Completing episode metadata (10 minutes)
In your shared notes document, add key points and questions for your episode.
Polishing a lesson
Lessons do not need to be perfected prior to teaching them the first time. In fact, keeping things relatively basic leaves you some flexibility while you run through the first few iterations of teaching the lesson, collecting feedback, and using that to guide improvements.
However, once you find that the lesson is beginning to reach something like a stable state, you may find the checklist for lesson reviewers in The Carpentries Lab useful as a guide for polishing the design and content. The checklist describes criteria for a lesson to meet a high standard in terms of its accessibility, design, content, and supporting information.
Key Points
- The objectives and assessments provide a good outline for an episode and then the text fills in the gaps to support anyone learning or teaching from the lesson.
- It is important to review your lesson for demotivating language, cognitive load, and accessibility.
- To reduce cognitive load and ensure there is enough time for for the materials, consider which lesson objectives are not needed and remove related content and assessments.